What to Do When You Start Up Your Bauer Compressor
So you have Bauer Compressors for industrial applications. However, it confuses you on how you’re going to start it up. In this article, you will know what things to do so that you can start up your Bauer compressors.
1. Check for Any Damage
Before you turn it on or operate Bauer compressors, you have to check for any damage caused by the transit. If ever you find any damage, you have to contact the contractors right away.
2. Solid Flat Ground
When you use the system, make sure it’s placed on solid flat ground. Prevent putting it to gravel or dusty ground because it’s better if you set it on a solid pace.
3. Tilt Angles
The maximum tilt angle should be plus or minus 5 degrees. That’s why right before you start the Bauer compressors, you have to read the instructions well.
4. Using Dipstick
You have to use this to check if the system has enough oil. It’s just like a car dipstick. And when you take it out, it shows the minimum and maximum markings.
5. Prevent Enclosed Spaces
When you start Bauer compressors, they must not be operated in enclosed spaces. It must be fitted with telescopic intakes, and the hopper LED.
6. Hop Collide Cartridge
This must be used if a Petrol engine powers the compressor.
.
